ZCAR1600
universal relay tester's operating system supports on-site reinstallation, which is very helpful when the
universal relay tester's operating system crashes or the device can't start up.
All steps to reinstall the
universal relay tester's operating system are following:
Step1: Connect the ZCAR1600
universal relay tester with keyboard and mouse by usb.
Step2: After power on the ZCAR1600
universal relay tester, press F8 immediately, then the tester enters DOS interface.
Step3: On the
universal relay tester DOS interface, entering "ghost11" as following:
Step4: In ghost11 software, select restore Local->Partition->From Image as following:
Step5: Only one backup *.gho file on the ZCAR1600
universal relay tester, using it to restore [Logical] destination device as following:
