Technical Support

Safety precautions for using CT \ Pt tester

:2020-04-22 18:20:23:

Ctp-1000c ctpt tester is a new generation of innovative CT and Pt tester developed by our company. It adopts high-performance DSP, FPGA and advanced manufacturing technology to ensure stable and reliable product performance, complete function, high degree of automation and high test efficiency. It is a professional test instrument for transformer in the power industry.
 
 
Ctp-1000c ctpt tester can be used in the following situations:
 
1. Electric power research institute conducts transformer calibration;
 
2. The transformer manufacturer shall carry out factory calibration;
 
3. Preventive test of power sector;
 
4. Handover test of engineering units and panel and cabinet enterprises.
 
When using ctp-1000c ctpt tester, pay attention to the following safety precautions to avoid personal injury and damage to this product or any other products connected with it.
 
1. As a safety measure, the instrument is equipped with a protective grounding terminal. Before the test, the grounding terminal on the side of the device shall be reliably grounded.
 
2. Prevent falling: do not place the instrument on an unstable platform or desktop to prevent the instrument from falling and damage.
 
3. Use appropriate power cord: use 220VAC, 50 / 60Hz power cord with current of 10a and above.
 
4. Ensure good heat dissipation: the fans and ventilation holes on the side of the instrument are set for ventilation and heat dissipation. Do not block them.
 
5. Prevent short circuit: do not let any foreign matter fall into the chassis to avoid short circuit.
 
6. Connect and disconnect correctly: do not connect or disconnect test leads while the device is being tested.
 
 
7. Do not operate without the cover plate: if the cover plate or panel has been removed, do not operate this product.
 
8. Use appropriate fuse: 12a fuse is used for this equipment.
 
9. Avoid contact with exposed circuit and live metal: do not touch exposed contacts and parts when the product has power.
 
10. Do not operate in case of suspected fault: if you suspect that the product is damaged, please check it by our maintenance personnel and do not continue to operate.
 
11. Operating environment: do not operate in humid or explosive environment.
 
12. This instrument is a precision electronic instrument. Please pay attention to prevent high temperature environment such as sun exposure when using it outdoors, and do a good job in blocking the sun and ventilation, so as to prevent the instrument from overheating or reducing the measurement accuracy.
 
13. Product transportation: during transportation, please lay buffer protection such as sponge outside the instrument to avoid vibration and turbulence damaging the instrument or reducing the accuracy of the instrument.
 
 
The above are some basic precautions of ctp-1000c ctpt tester. In addition, you need to read the product manual before using the product. If you are not clear, welcome to contact our online customer service, we will answer for you.

My Site © www.kvtester.com    Powered By Kvtester