Transformer Tester
Your location : Home > PRODUCTS > Transformer Tester

Transformer test system

type:ZC-200-630kVA/10kV

ZC-200 Transformer test system can conduct all routine tests for transformers, including No-load and load test, Induced voltage test, Power frequency withstand voltage test, partial discharge test, DC resistance test, turns ratio test, temperature rising test etc.

Online Service
  • Product Introduction

ZC-200 Transformer test system can conduct all routine tests for transformers, including No-load and load test, Induced voltage test, Power frequency withstand voltage test, partial discharge test, DC resistance test, turns ratio test, temperature rising test etc.


Test items
Three -phase voltage effective value
Three -phase current effective value
Three -phase active power loss
Three -phase reactive power loss
Three-phase average value of voltage
Three-phase voltage average value
Three-phase current average value
Total power
Percentage of no-load current
Frequency
Power factor
lnduction test
Percentage of impedance voltage


  • Product Parameters
Configuration Plan for 630kVA/10kV Transformer Comprehensive Test Bench
Test itemsDevice NameModel parametersAmountRemarks Description

Main console and external 

devices

Fully automatic transformer testing

 bench

630kVA/10kV
1Computer fully automatic control

Three phase induction electric 

voltage regulator

30kVA/20~650kV
1
Transformer no-load load testTransformer no-load load testerZC-202B
1Communication port required
Current transformer50A/5A/3kV1

DC resistance test, variable ratio

group test

DC resistance testerZC-205A1Communication port required
Full-function variable ratio testerZC-203A1Communication port required

Frequency doubling induction withstand voltage and partial 

discharge test

Intermediate frequency generator

set

20kVA1The output voltage of the intermediate frequency generator set is 50V-800V
Digital Partial Discharge Inspection SystemZC-2541Three testing channels

Three phase isolation low-pass 

filtering

20kVA1Effectively isolate and attenuate spark discharge signals and various interference signals from the power supply side
Coupling capacitor
1Includes 3 coupling capacitors

Power frequency withstand 

voltage test

Complete set of power frequency 

withstand voltage test device

ZC-501A
1

Transformer insulation resistance 

test

Insulation resistance testerZC-4301

The maximum measurable insulation

resistance is 10T Ω


  • Product Features
1. Automatically record test data and save it in the database.
2. The data of No-load test can be corrected by waveform and rated voltage automatically.
3. The data of Load test can be corrected by temperature (75℃, 100℃, 120℃, 145℃) and rated current.
4. In No-load test, LV side voltage can be monitored.
5. In Load test, HV side current can be monitored.
6. All test functions and test process can be selected and controlled by buttons of front panel.
7. All test results are corrected according to the requirement of GB1094, IEC60076 or ANSI C57.
8. Test procedure can be proceed by PC software.
9. All data can be stored and printed.
10. With zero protection, over-current protection and over-voltage protection functions.
11. CT/PT range switch automatically.
12. The test bench will fully control to the whole loop circuit and monitor the measurement.
13. Safety alarm system.


Please leave the product information you want to know!

My Site © www.kvtester.com    Powered By Kvtester