High Voltage Tester
Your location : Home > PRODUCTS > High Voltage Tester

0.1Hz integrated ultra-low frequency and high voltage generator

type:ZC-524D-30kV

The withstand voltage test can be classified into the AC withstand voltage test and the DC withstand voltage test. The AC withstand voltage test can also be divided into power frequency, frequency conversion and 0.1Hz ultra-low frequency test technologies. The 0.1Hz ultra-low frequency technology is the latest technology and is the technology recommended by IEC (International Electrotechnical Commission) at present. The new generation of VLFS series microcomputer type 0.1 Hz ultra-low frequency high-voltage generators are core products independently developed by FARSEE,they overcome many shortcomings of mechanical domestic products, and its cost performance is much higher than the similar imported products. It is particularly suitable for the withstand voltage test of electrical equipment (e.g.: power cables, power capacitors, large- and medium-sized generators and motors, etc.) with large insulation equivalent capacitance.

Online Service
  • Product Introduction

The withstand voltage test can be classified into the AC withstand voltage test and the DC withstand voltage test. The AC withstand voltage test can also be divided into power frequency, frequency conversion and 0.1Hz ultra-low frequency test technologies. The 0.1Hz ultra-low frequency technology is the latest technology and is the technology recommended by IEC (International Electrotechnical Commission) at present. The new generation of VLFS series microcomputer type 0.1 Hz ultra-low frequency high-voltage generators are core products independently developed by FARSEE,they overcome many shortcomings of mechanical domestic products, and its cost performance is much higher than the similar imported products. It is particularly suitable for the withstand voltage test of electrical equipment (e.g.: power cables, power capacitors, large- and medium-sized generators and motors, etc.) with large insulation equivalent capacitance

  • Product Parameters
Main technical parameters of ultra-low frequency and high voltage generator
Peak VoltageMeasuring RangeWeightPurpose
30kV≤1.1μF @ 0.1Hz

Controller: 4kg  

 Booster: 25kg

Cables, generators with voltage of 10kV and below
≤2.2μF @ 0.05Hz
≤5.5μF @ 0.02Hz
50kV≤1.5μF @ 0.1Hz

Controller: 5kg  

 Booster: 35kg

Cables, generators with voltage of 20kV and below
≤3.0μF @ 0.05Hz
≤7.5μF @ 0.02Hz
Power supply220V ± 10%, 50 ± 5% Hz
Note: If a portable generator is used for power supply, it is required that the output voltage and frequency of the generator be stable (generally requiring a power greater than 3kW, a frequency of 50Hz, and a voltage of 220V ± 5%). Otherwise, some auxiliary measures should be used to stabilize the generator output
Output voltage accuracyOutput high voltage peak instability≤ 1%
Output voltage frequency instability≤ 3%
Output voltage waveform distortion rate≤ 5%
Operating environmenttemperature -100C~+400C, humidity ≤ 85% RH


  • Product Features

1、Advanced technology: By adopting digital frequency conversion technology and microcomputer control, the test procedures of boosting, voltage reduction, measurement, protection, etc. are fully automated. The instrument has the electronic calendar function, and the time can still be maintained after powering down.

2、Convenient operation: Simple wiring, and fully automatic operation.

3、Comprehensive protection: Multi-protection (over-voltage protection, over-current protection on high- and low-voltage side), rapid action (action time ≤ 20 ms), the instrument is safe and reliable.

4、Safe and reliable: The controller and the high-voltage generator are in low-voltage connection and under photoelectric control, which are safe and reliable to use.

5、By adopting high- and low-voltage closed-loop negative feedback control circuit, the output has no capacitive rise effect.

6、Complete configuration: 8-inch industrial touch screen, manual storage, and manual printing.

7、The instrument has the data communication function. It can be connected to a computer through a USB port for uploading test data to the computer.

8、The instrument has the help documentation function, through which the directions for use, wiring and notes of the instrument can be known without viewing the instruction book.

9、The instrument has the system setting function, through which the current time can be modified.

10、Large test range: Multi-frequency selection of 0.1Hz, 0.05Hz and 0.02Hz, a large test ange.

11、Small size and light weight: Very conducive to outdoor operations.


Please leave the product information you want to know!

My Site © www.kvtester.com    Powered By Kvtester